Specialty Control Systems' BLC Load Centers are UL Listed and conform to all applicable NEMA specifications.

Enclosure Features

• NEMA 3R "rain-proof" enclosure fabricated from 14 gauge galvanized steel or 14 gauge T-304 stainless.
• Convenient "lift-cover" construction to provide quick access to breakers.
• Hasp and staple are provided for padlocking
• Standard Size is 19"H x 14-1/2"W x 5"D (483mm x 368mm x 127mm) to provide ample space for wiring requirements.
• Mounting tabs on top and bottom of enclosure.

Load Center Features

• Factory installed 2-pole main breaker up to 125 Amps continuous rating. Ample space for adding plug-in breakers. Available space for up to 24 single pole breakers or 12 double pole breakers.
• Branch breakers available in single or double pole up to 70 Amps.
• Rated for 120/240 Volts AC, single phase, 3-wire with neutral and grounding provisions.
• Incoming power is fed through main breaker via mechanical solderless type lugs approved for Cu or Al conductors. Lugs accept incoming wire sizes from #4 through #2/0.
• "Dead-Front" trim for personnel protection.
• One piece plated copper bus.
• 22,000 RMS sym. Amperes short circuit current rating with main breaker installed.
• Accepts Square D "QO" series plug-in branch circuit breakers.

Applicable Standards

All BLC Load Centers meet or exceed the following standards:

• NEC Federal Specifications WP-115c, Type 1, Class 2
• UL Service Entrance Equipment